SuperMicro P4DC6+

версия для печати

• Form Factor Extended ATX - Size: 12" x 13" (W x H)
• Processor Support - Dual Intel 603-pin Xeon processors 1.50-2.40GHz and faster
• Chipset - Intel 860 chipset
• Front Side Bus - 400 MHz
• Memory
  • Dual Channel 600/800 MHz RDRAM with Transfer Rate up to 3.2 GB/s
  • Four 184-pin RIMMs for 600/800 MHz RDRAM up to 2 GB
  • Two Rambus Inline memory modules of the same memory size is the minimum requirement.
  • (Memory recommendation list)
• I/O Expansion
  • 2 64-bit 66MHz PCI
  • 4 32-bit 33MHz PCI
  • 1 4xAGP Pro 1.5V
• Onboard Devices
  • Adaptec Zero-channel SCSI RAID controller support as an optional
  • Dual EIDE ports support Ultra DMA 100MB/s of Burst data transfer rate, supports UDMA Mode 5, PIO Mode 4 and ATAPI
  • VRD (Voltage Regulator Down)
  • AC97' Audio
  • Onboard Adaptec AIC-7899W (7902 future option) dual channel Ultra160 (320) SCSI controller
  • Intel 82559 LAN controller
  • PC hardware health monitoring
  • 1 Floppy
  • 2 Fast UART 16550 serial ports
  • 1 ECP/EEP parallel port
  • 1 Infrared header
  • Up to 4 USB ports
  • PS/2 keyboard and mouse ports
• PC Health Monitoring
  • Monitoring the voltages of the CPU core and the status of system power supply (+3.3V, + 5V, + 12V)
  • CPU/chassis temperature monitoring
  • CPU fan auto-off in sleep mode
  • CPU overheat LED header
  • LED and control for chassis intrusion detection
  • System resource alert
  • Support for system management software
• Special Features
  • Suspend to RAM (STR): All tasks are stored in RAM and can be resumed within 10 seconds from the minimum power consuming suspend mode.
  • Wake-on-LAN allows for remote network management and configuration of the PC, even in off-hours when the PC is turned off. This reduces the complexity of managing a network.
  • Onboard 3-phase switching power regulator supports CPU core voltages from 1.1-1.85 volts
  • 4 tachometer fan connectors (for CPU, chassis, and thermal control fans)
  • Keyboard wake-up from Soft-off
  • CPU frequency settings - changeable in BIOS setup
  • Connector for LED overheat indicator
  • Overheat backup fan connector for CPU protection
• BIOS Features
  • Supports ACPI (Advanced Configuration and Power Interface) and APM (Advanced Power Management)
  • Slow blinking LED for Sleep State indicator
  • Main switch override mechanism. Power-up mode control upon recovery from AC power loss
  • PC Health Monitoring protects your system from problems even before they occur.
  • DMI support
  • ACPI/APM power management
  • RTC (Real-Time Clock) wakeup
  • External modem remote ring-on when system is in Soft-Off state
  • BIOS rescue hot keys for rescuing BIOS chip from flash failure
  • Hardware BIOS virus protection
  • 4Mb Flash ROM
• Other Features
  • ACPI/APM power management
  • Internal/external modem ring-on
  • Control of power-on mode for recovery from AC power loss
  • One WOL (Wake-On-LAN) connector
  • One chassis intrusion connector
• Chassis Compatibility
  • Extended ATX Chassis
  • SC760P4 (400W)
  • To ensure system stability, a 400W (minimum) ATX12V power supply (besides the 20 pins, both 4-pin and 8-pin +12v power connector) is required.
• Standard Retail Package
  • One SUPER P4DC6+ mainboard
  • CPU heatsink retention and clips
  • 1 three-ended 80-wire/40-pin IDE UDMA/100 ribbon cable for high speed UDMA IDE devices
  • 1 floppy ribbon cable
  • 2 Fan-041 with heatsink
  • Two TMR-007
  • One BIOS/drivers CD

SuperMicro P4DC6+ Вы можете обсудить на форуме.