EliteGroup L4IBAE
- PROCESSOR
- Socket 478 supports the
- Intel® Pentium® 4 processor
- CHIPSET
- Intel® 82845E & 82801DB Chipset - Memory Controller Hub (MCH), I/O Controller Hub 4 (ICH4) & Firmware Hub
- (FWH) with following features:
- Integrated USB2.0 Host Controller
- Support 4X AGP(AGP 2.0 Specification), 1.5V only
- LPC I/O: Winboard W83627HF
- LAN: MAC integrated in ICH4 and Intel® 82562ET PHY on board (optional) or RealTek 8100B LAN on board (optional)
- PROMISE PDC20265R IDE RAID Controller (optional)
- AC97 Audio Codec
- Compliant with AC97 2.2 specification
- MEMORY
- Three 184-pin DDR DIMM sockets for 2.5V DDR SDRAMs (DDR266/DDR200)
- Maximum: 2GB
- SYSTEM BIOS
- Award BIOS with Flash ROM in Firmware Hub (FWH)
- Supports Plug and Play 1.0A, AMP 1.2, Multi Boot, DMI
- Full Support for ACPI revision 1.0A specification
- I/O INTERFACE
- Supports Plug and Play function
- PS/2 keyboard and PS/2 mouse connectors
- Dual USB Ports and an optional LAN connector
- One - EPP/ECP mode parallel port
- One - 16550 high-speed serial I/O ports
- Audio Ports (Line-in, Line-out, Mic-in, CD-in and game port)
- Supports 360K~2.88M Byte, 3 Mode FDDs or LS120
- Supports eight ATA/ATAPI devices (four optional)
- Standard: Dual PCI IDE interfaces - support four IDE devices (PIO mode 4, DMA Mode 2, Ultra DMA 66/100)
- Option: Two independent ATA channels for another four IDE devices (PIO Mode 4 DMA Mode 2, Ultra DMA66/100)
- ATX12V Power Supply Connectors
- Ports, Headers and Others:
- IrDA header
- Additional four USB ports (LUSB1/USB2 and USB3
- Two IEEE1394 headers (optional)
- Front Panel MIC/Line-out header
- HDD LED, ACPI MSG LED, Reset Switch, Power Switch headers
- CPU, Power and CASE Fan headers
- LAN Card Wake Up / Modem Ring Wake-Up headers
- RTC & BATTERY
- Intel® I/O Controller Hub 4 (ICH4) included 256 bytes CMOS SRAM
- With CMOS SRAM hardware clear jumper
- EXPANSION SLOTS
- 6 PCI slots, 1 AGP slot, 1 CNR slot
- FORM FACTOR
- ATX (304mm*244mm), 4 Layers
EliteGroup L4IBAE Вы можете обсудить на форуме. |